Monday night (July 2nd) starting at 11:59PM, we will be performing followup maintenance on hardware serving Fusion and FlexLink Fiber customers in the Brentwood area. The work should not be customer impacting and the maintenance window is 3 hours.
-Network Engineering
Update: 1:10AM, Maintenance has successfully been completed without incident.
Tonight starting at 11:59 PM we will be conducting maintenance on our phone switch. We do not expect any issues with call completion, however commportal will be unavailable for 5 to 10 minutes during this time. The expected maintenance window for this operation is 4 hours.
~Network Engineering
Update: 3:35 AM, Maintenance has been completed
Tomorrow night (June 28th) starting at 11:59PM, we will be performing followup maintenance on hardware serving Fusion and FlexLink Fiber customers in the Brentwood area. The work should not be customer impacting and the maintenance window is 3 hours.
-Network Engineering
Update 12:25AM: This maintenance has been postponed for tonight.
Tonight, starting at 11:59PM, a subset of customers in Napa and Benicia will experience a brief service interruption while we perform some maintenance. Expected down time is about 15 minutes while the equipment reboots. The maintenance window will be 2 hours.
– Network Engineering
A small portion of our Flexlink Long Range customers are currently offline in the Sebastopol area. We have dispatched a technician to the CO to troubleshoot this issue. There is no ETR at this time.
-Sonic Network Operations
Update (8:44pm) Service is now restored.
Tonight, starting at 11:59PM, we will be performing maintenance on equipment that serves a subset of our Flexlink Ethernet customers based in Los Angeles. This window is scheduled for 2 hours. During this time, circuits may experience a brief interruption of service. This post will be updated once the maintenance is complete.
Tonight, starting at 11:59PM, we will be performing maintenance on equipment that serves a subset of our Flexlink Ethernet customers based in Los Angeles. This window is scheduled for 2 hours. During this time, circuits may experience a brief interruption of service. This post will be updated once the maintenance is complete.
Tomorrow night (June 12th) starting at 11:59PM, we will be performing maintenance on hardware serving Fusion and FlexLink Fiber customers in the Brentwood area. Though delicate in nature, we do not expect this work to be service impacting. The maintenance window is 2 hours.
-Network Engineering
1:30AM – This work has concluded for the night. Though not customer impacting, the operation was not fully successful, and a future maintenance window will be rescheduled soon.
This Saturday (6/9) starting at 5AM, one of the San Francisco data centers we collocate equipment, will be performing a planned power maintenance. Although we have been assured by the colocation provider this work will be non-impactful, we have taken additional preparations to verify redundancy on all critical hardware, and will have a network engineer on site as a fail-safe. The maintenance window officially extends until 6PM, and we will provide update when all work is completed.
– Network Engineering
(Update 8:12am) – We had a Power supply fail in a piece of our equipment during the first phase of the datacenter power maintenance. We quickly swapped out the cabling to restore the unit. Legacy DSL customers would have been impacted but service should now be restored.
Update(1:03pm) Power maintenance complete.